Weed cleaning head
Make weed and grass removal between pavers super easy with the TEXAS weed cleaning head for brush cutters - gentle on pavers.
Description
This special accessory for brush cutters makes it incredibly easy to remove grass and weeds between your pavers. The centrifugal force causes the line to bend outward, so when you hold the head at a slight angle, the robust 3 mm trimmer line effectively cuts the weeds while remaining relatively gentle on the pavers.
No tools are needed to replace the trimmer line. Simply cut eight pieces of line and insert them into the holes on the weed cleaning head.
How to mount the weed cleaning head
Our weed cleaning head fits most brush cutters with a minimum engine power of 32 cc and a 10 mm bolt (10x1.25 mm with left-hand thread). Mount the weed cleaning head on top of the disc that normally holds the blade, and secure it with the left-hand nut that holds the blade.
You CANNOT mount the weed cleaning head on a grass trimmer with a 7 or 8 mm bolt.
Please note
A set of trimmer lines (8 pieces of approximately 30 cm each) is included.
The weed cleaning head cuts weeds but does not remove their roots, so regrowth may occur.
This accessory is NOT compatible with our 58V products BMZ5800 and BCZ5800.
TEXAS recommends
Although the weed cleaning head is gentle on pavers, we recommend testing it on a discreet area first to ensure that the pavers are not damaged by contact with the trimmer line.
Upgrade your trimmer head
Need an extra trimmer head, a sturdier one, or perhaps a weed brush for your brush cutter? We have everything you need for your brush cutter right here.
Specifications
Box width
: 10 cm
Box length
: 10 cm
Box height
: 12 cm
Manual
Spare part drawing
This special accessory for brush cutters makes it incredibly easy to remove grass and weeds between your pavers. The centrifugal force causes the line to bend outward, so when you hold the head at a slight angle, the robust 3 mm trimmer line effectively cuts the weeds while remaining relatively gentle on the pavers.
No tools are needed to replace the trimmer line. Simply cut eight pieces of line and insert them into the holes on the weed cleaning head.
Our weed cleaning head fits most brush cutters with a minimum engine power of 32 cc and a 10 mm bolt (10x1.25 mm with left-hand thread). Mount the weed cleaning head on top of the disc that normally holds the blade, and secure it with the left-hand nut that holds the blade.
You CANNOT mount the weed cleaning head on a grass trimmer with a 7 or 8 mm bolt.
A set of trimmer lines (8 pieces of approximately 30 cm each) is included.
The weed cleaning head cuts weeds but does not remove their roots, so regrowth may occur.
This accessory is NOT compatible with our 58V products BMZ5800 and BCZ5800.
Although the weed cleaning head is gentle on pavers, we recommend testing it on a discreet area first to ensure that the pavers are not damaged by contact with the trimmer line.
Upgrade your trimmer head
Need an extra trimmer head, a sturdier one, or perhaps a weed brush for your brush cutter? We have everything you need for your brush cutter right here.
| Box width | : 10 cm |
| Box length | : 10 cm |
| Box height | : 12 cm |
Weed cleaning head
Dimensioner
Links
Art. number: 441124
EAN: 5708906969869
Make weed and grass removal between pavers super easy with the TEXAS weed cleaning head for brush cutters - gentle on pavers.
Description
This special accessory for brush cutters makes it incredibly easy to remove grass and weeds between your pavers. The centrifugal force causes the line to bend outward, so when you hold the head at a slight angle, the robust 3 mm trimmer line effectively cuts the weeds while remaining relatively gentle on the pavers.
No tools are needed to replace the trimmer line. Simply cut eight pieces of line and insert them into the holes on the weed cleaning head.
How to mount the weed cleaning head
Our weed cleaning head fits most brush cutters with a minimum engine power of 32 cc and a 10 mm bolt (10x1.25 mm with left-hand thread). Mount the weed cleaning head on top of the disc that normally holds the blade, and secure it with the left-hand nut that holds the blade.
You CANNOT mount the weed cleaning head on a grass trimmer with a 7 or 8 mm bolt.
Please note
A set of trimmer lines (8 pieces of approximately 30 cm each) is included.
The weed cleaning head cuts weeds but does not remove their roots, so regrowth may occur.
This accessory is NOT compatible with our 58V products BMZ5800 and BCZ5800.
TEXAS recommends
Although the weed cleaning head is gentle on pavers, we recommend testing it on a discreet area first to ensure that the pavers are not damaged by contact with the trimmer line.
Upgrade your trimmer head
Need an extra trimmer head, a sturdier one, or perhaps a weed brush for your brush cutter? We have everything you need for your brush cutter right here.
Video
Note: Video can be seen over the model.
Specifications
Box width
: 10 cm
Box length
: 10 cm
Box height
: 12 cm
Manual
Spare part drawing
This special accessory for brush cutters makes it incredibly easy to remove grass and weeds between your pavers. The centrifugal force causes the line to bend outward, so when you hold the head at a slight angle, the robust 3 mm trimmer line effectively cuts the weeds while remaining relatively gentle on the pavers.
No tools are needed to replace the trimmer line. Simply cut eight pieces of line and insert them into the holes on the weed cleaning head.
Our weed cleaning head fits most brush cutters with a minimum engine power of 32 cc and a 10 mm bolt (10x1.25 mm with left-hand thread). Mount the weed cleaning head on top of the disc that normally holds the blade, and secure it with the left-hand nut that holds the blade.
You CANNOT mount the weed cleaning head on a grass trimmer with a 7 or 8 mm bolt.
A set of trimmer lines (8 pieces of approximately 30 cm each) is included.
The weed cleaning head cuts weeds but does not remove their roots, so regrowth may occur.
This accessory is NOT compatible with our 58V products BMZ5800 and BCZ5800.
Although the weed cleaning head is gentle on pavers, we recommend testing it on a discreet area first to ensure that the pavers are not damaged by contact with the trimmer line.
Upgrade your trimmer head
Need an extra trimmer head, a sturdier one, or perhaps a weed brush for your brush cutter? We have everything you need for your brush cutter right here.
Note: Video can be seen over the model.
| Box width | : 10 cm |
| Box length | : 10 cm |
| Box height | : 12 cm |
