This moss blade with springs is specially designed to fit a range of TEXAS lawn mowers, so you can also use your lawn mower to loosen and remove moss from your lawn. The blade is 41 cm, so you cover a wide area while working.

A moss blade de makes it even easier to maintain a neat lawn, but remember to check below whether the moss blade also fits your specific model.

For the moss blade with springs to fit, your TEXAS lawn mower must run on gasoline, have a cutting width of at least 41 cm, and be a model in these current series.

Premium series
Razor series
RL series
RLV series
XT series
ZT models 514TR/W, 515TR/WE, 5110TR/WE & 5110TR/W

You can also check whether the de-thatcher blade fits based on your lawn mower’s item number – even if your model is no longer in the range. The de-thatcher blade fits if the lawn mower’s item number is among these:

90061130 – 90061135
90066065 – 90066079
90066084 – 90066115
90066400 – 90066479
90066500 – 90066620

IMPORTANT! Remove the spark plug cap first, so the engine does not start unintentionally.

1 | Loosen and remove the lawn mower blade. Put the blade aside and keep the blade bolt and washer.
2 | Mount the springs on your moss blade (see illustration further up). Tighten the nuts firmly.
3 | Match the holes in the moss blade with the blade holder, mount the blade, and tighten it securely with the washer and blade bolt.
4 | Reattach the spark plug cap.
5 | Adjust the lawn mower’s cutting height so the moss springs just touch the ground.

You can also watch a video further down that shows you how to do it.

This moss blade with springs can only be used on selected TEXAS lawn mowers – see which ones further up.

Blade bolt, blade holder and washer are NOT included, as the existing parts on the lawn mower must be used.

Lawn mowers from TEXAS
Do you need a good lawn mower? TEXAS definitely has one for your needs, whether you prefer gasoline, battery or electric, and whether you have a large or small garden.

Note: The video may cover multiple models.